Pipe WrapMathey Dearman Pipe Wrap has double-ruled edge so it is never upside down or backwards. The Wrap can be used as a straight edge to mark straight lines around the pipe and to mark angles for pipe elbows. The Pipe Wrap is constructed of highly abrasion and solvent resistant materials to last under heavy use.

Pipe Wrap Includes:
  • Table of tangents and straight edge
  • Instructions for cutting elbows
  • Sides marked in 1/8” (3.2 mm) increments to 36” (914 mm)
  • Instructions for finding the length of an elbow
  • 45-degree angle chart
  • Degree markings

Specifications

Pipe Wraps
MODEL DESCRIPTION SHIPPING WEIGHT SHIPPING DIMENSIONS
LBS KG IN MM
D160 4”x4’ / /102x1219mm - 3-15” Pipe 0.40 0.18 12 x 10 x 6 305 x 254 x 152
D170 4”x6’ / 102x1829mm - 3-22” Pipe 0.60 0.27 12 x 10 x 6 305 x 254 x 152
D177 4”x7’ / 102x2134mm - 3-26” Pipe 0.65 0.29 12 x 10 x 6 305 x 254 x 152
D184 4” Wide - 1’ Increments 0.09 0.04 12 x 10 x 6 305 x 254 x 152
D185 5” Wide - 1’ Increments 0.10 0.05 12 x 10 x 6 305 x 254 x 152
D187 7” Wide - 1’ Increments 0.10 0.05 12 x 10 x 6 305 x 254 x 152

The Pipe Wrap is an excellent tool for aligning MagnaCut XM and CGM Guide Tracks on pipe over 18" (457 mm) to insure a square cut.

 
Click Here for a
PDF Data Sheet