CGM-1 Cold Cutting and Beveling Machine Power Supplies |
 |
|
CGM Electric Motor Driven Hydraulic Power Supply
Part No: 05.5500.501
• Utilizes 380 volt/50Hz - electric motor (15 HP) to drive the vane type hydraulic pump.
• Meets IEC - UNEL MEC Standards.
• Has a maximum output of 2,000 psi (138 bar) that is regulated with a pressure relief valve.
• Reservoir capacity of approximately 52 gallons (200 liters). An indicator level located on the side of the reservoir indicates fluid level. 25-micron steel mesh filter is incorporated into the
reservoir.
• Pressure outlet coupling is 1/2" (12.7mm) and the return coupling is 3/4" (19mm).
• Unit is moved about the shop easily with a forklift or pallet truck.
• Lifting lugs come standard for moving the power supply in the field. |
|
|
|
 |
CGM Diesel Motor Driven Hydraulic Power Supply
Part No: 05.5500.501H
• Diesel engine drives the axial piston hydraulic pump.
• Adjustable-volume stop provides a means of controlling flow to the CGM-1.
• The unit has a maximum output of 2,000-psi (138 bar) that is regulated with a pressure relief valve. |
|
| |
 |
|
CGM Pneumatic Power Supply
Part No: 05.5500.556
• Air compressor delivers 120 pounds per square inch at 142 cubic feet/minute (8 bar at 4000 liters/minute).
• Mounted on a trailer, the unit is easily towed behind most vehicles.
• Available with gas or diesel engine. |
| |
|
|
|
|
Lubrication / air Regulator Assembly
Part No: 05.5500.00B
The lubrication/air regulator assembly for the air-driven CGM regulates the pressure from the air compressor down to the CGM operating pressure of 90 psi (6 bar). The lubrication/air regulator assembly also provides a mist of oil to lubricate the blade and drive air motor to help operate more efficiently. |
|
