Lever Cage Clamps

Lever Cage ClampsMathey Dearman Cage Clamps are available in either tack or no-tack versions, ranging in sizes for pipes 2” to 60” (51 mm to 1524 mm). Our Cage Clamps will align pipe through Schedule 80. Cage Clamps are intended for alignment use only are not designed to reform pipe. Each size Clamp fits one specific pipe diameter. If the O.D. of the pipe varies more than +/- 3/16" (5 mm) from the indicated Clamp diameter, pipes may not align accurately.

FEATURES:

  • QUICK | Aligns pipes easily and fast
  • EFFICIENT | Good choice when aligning pipes with no reforming required

Cage Clamp Cross Bar Designs

Tack-type straight cross bars have flared ends so pipes can be moved easily into position and clamped. After the pipe is tack welded, the clamp is removed from the pipe and the weld is completed.
No-tack cross bars are arched to permit a full-circle weld without removing the Clamp. The no-tack Clamp can help increase welding quality and efficiency.

Specifications

Hand-lever Tack Model Hand-lever No-tack Model Pipe Size in. (mm)
01.0505.001 --- 2 (51)
01.0505.002 --- 3 (76)
01.0505.003 01.0505.N03 3.5 (89)
01.0505.004 01.0505.N04 4 (102)
01.0505.005 01.0505.N05 5 (127)
01.0505.006 01.0505.N06 6 (152)
01.0505.008 01.0505.N08 8 (203)
01.0505.010 01.0505.N10 10 (254)
01.0505.012 01.0505.N12 12 (305)
01.0505.014 01.0505.N14 14 (356)
01.0505.016 01.0505.N16 16 (406)
01.0505.018 01.0505.N18 18 (457)
01.0505.020 01.0505.N20 20 (508)
01.0505.022 01.0505.N22 22 (559)
01.0505.024 01.0505.N24 24 (610)
01.0505.026 01.0505.N26 26 (660)
01.0505.028 01.0505.N28 28 (711)
01.0505.030 01.0505.N30 30 (762)
01.0505.032 01.0505.N32 32 (812)
01.0505.034 01.0505.N34 34 (864)
01.0505.036 01.0505.N36 36 (914)
01.0505.038 01.0505.N38 38 (965)
01.0505.040 01.0505.N40 40 (1016)
01.0505.042 01.0505.N42 42 (1219)
01.0505.048 01.0505.N48 48 (127)
01.0505.054 01.0505.N54 54 (1372)
01.0505.060 01.0505.N60 60 (1524)

Clamps with stainless steel contact points or for odd-size pipe available on request.

Add SS at end of part number for stainless steel.